Table of Contents
Advertisement
QuickStart Guide
Note: When DMX512 signal is present,
To navigate fixture status menus:
Step 1. At default screen, press LEFT or RIGHT arrow button once. The default menu screen will change to allow
for quick reference to the following items (note, depending on which arrow button is pressed, status screens
may appear in reverse order):
a. DMX Address (note, if fixture is UNLOCKED, hit [OK] to change DMX address).
b. Fixture Hours (displays fixture operating hours since last reset).
c. Fixture Power (displays Max Power Limit setting (in Watts), Present Power consumed by fixture (in
Watts), and Hours of Use).
d. Fixture Status (displays current operational temperature, LED status, and fan speed setting).
Step 2. Press LEFT or RIGHT arrow buttons to scroll through status screens.
Step 3. Press [ESC] at anytime to access Main Menu.
Note: When DMX512 signal is present,
3. Security
Unwanted changes to the Fixture's Configuration or Setting can be controlled by locking the fixture's menu.
PLCYC1 MKII LED Luminaires are shipped with a default numeric PIN code of "0000" (four zeros). Users may set
their own PIN code (four-digit number) via
down and keep it in a secure location. Note, Philips Selecon does not have records of PIN codes established by users
or owners.
Note: Contact Philips Selecon technical support if a unit is locked and the PIN code is lost for instructions on how to
reset luminaire.
Note: If the Fixture is locked when it is powered down the fixture will remain in the locked state when powered up.
Locking Fixture
To lock the fixture:
Step 1. At Main Menu, press [MENU] and scroll to
Step 2. Press [OK].
Step 3. Enter four-digit, user-selectable, PIN code. Press [OK].
Step 4. Use [LEFT ARROW] or [RIGHT ARROW] keys to highlight "YES", press [OK] or [ESC] twice to cancel
action.
Step 5. Fixture is now locked if locking process was not canceled as described in previous step.
Note: When the Fixture is Locked only the [ESC]/[MENU] key is functional. Pressing this key will display a request
a PIN code to be entered. When a valid PIN code is entered the fixture is unlocked.
1 0
OPERATION AND PROGRAMMING
Edit Preset
Color Mixer
and
Edit Preset
Color Mix
and
Settings > General > Set PIN
Lock Fixture
PLCYC1 MKII LED Luminaire
options will not appear in menu structure.
options will not appear in menu structure.
. When setting a PIN code, write it
. Note, default PIN is "0000" (four zeros).
Advertisement
Table of Contents
