Table of Contents
Advertisement
Fig . 10 .2
Fig . 10 .3
0
+ 8
mm
Fig . 10 .4
+ 8 mm
+ 12.5 mm
42
LEVELLING THE COOKER
The cooker is equipped with 4 LEVELLING
FEET and may be levelled by screwing or
unscrewing the feet with a spanner (fig.
10 .2) .
The adjustable feet are already fitted to the
cooker but the locking nuts which can be
found in the oven packaging require to be
fitted as detailed on figures 10.3 - 10.4.
It is important to observe the prescriptions
of figures 10.3 - 10.4.
BACKGUARD
Before installing the cooker, assemble the
backguard "C" (fig. 10.5).
•
The backguard "C" can be found
packed at the rear of the cooker .
•
Before
assembling
protective film/adhesive tape.
•
Remove the two spacers "A" and the
screw "B" from the rear of the cooktop .
•
Assemble the backguard as shown
in figure 7.5 and fix it by screwing the
central screw "B" and the spacers "A" .
Fig . 10 .5
remove
any
Hide quick links:
Advertisement
Table of Contents
