WIRE RACKS
•
Assemble the wire racks to the oven walls using the screws (2 screws figs. 9.6a, 9.6b;
4 screws fig. 9.6c).
•
Slide in, on the guides, the shelf (figs. 9.7a, 9.7b).
The shelf must be fitted so that the safety notch, which stops it sliding out, faces the
inside of the oven; the guard rail shall be at the back .
•
Left ovens only: slide in, on the guides, the tray (figs. 9.7a, 9.7b).
•
To dismantle, operate in reverse order .
Fig .9 .6a
Fig . 9 .6b
Guard rail
Guard rail
Stop notch
Fig . 9 .7a
Stop notch
Fig . 9 .7b
31