Panasonic WV-NP1000 Operating Instructions Manual page 9

Power cable
Connect the power cable firmly. Align the connected power
cable not to be pulled/stressed when the camera pans or
tilts. (Pull/stress made by panning/tilting of the camera may
disconnect the power cable.)
Do not aim the camera at strong light sources.
A light source such as a spot light causes a blooming (light
bleeding) or a smear (vertical lines).
Smear
Blooming
Broadband router
When it is necessary to use a broadband router to connect
the camera to the Internet, use a broadband router with the
port forwarding function (NAT, IP masquerade).
Refer to the Operating Instructions (PDF) for further infor-
mation about the port forwarding function.
Radio disturbance
When the camera is used near TV/radio antenna, strong
electric field or magnetic field (near a motor or a trans-
former), images may be distorted and noise sound may be
produced.
Safety wire
The safety wire holder is provided on the top of the camera.
To prevent the camera from dropping that may cause acci-
dental injury, attach one end of a safety wire (locally pro-
cured) to the safety wire holder of the camera and the other
end to a locally procured safety wire holder (bracket, etc.)
to be installed on the foundation part of the building.
Do not install the camera in a humid or dust-laden envi-
ronment.
Otherwise, lifetime of the internal parts may be shortened.
Do not strike or shake, as this may damage the appli-
ance.
It may cause a malfunction.
Blight subject
Save the configured settings
We recommend that you note down your settings and save
them. We assume no responsibility whatever for any dam-
ages resulting from a lost of your settings.
Distributing, copying, disassembling, reverse compil-
ing, reverse engineering, and also exporting in violation
of export laws of the software provided with this prod-
uct, is expressively prohibited.
9