Continuous Drainage; Maintenance & Cleaning; Back View - Philco PDA20DX User Manual

Continuous Drainage

When the machine need continuous drainage,
drainage holes after remove shell plug head,
with a suitable length diameter 12mm flexile
hose through the rear shell drainage hole is
connected to the drain mouth machine, contin-
uous operation under the water, the water tank
can not. The machine can operate continuously
and not because of the water tank is filled with
water and lead to shutdown protection.
Room temperature
Maintenance & Cleaning
• For its casing is made of wood and plastic, do not place it in direct sunlight.
• Remove the water tank with care.
• If not using the unit for a long time. Please Switch off and unplug the unit, empty the water
reservoir, and pack it after 2 days, then, keep it in dry and ventilated place.
• Only use a soft clean cloth for all cleaning purpose. Do not use gasoline, paint thinner or other
chemicals to clean the unit.
• Cleaning mesh filter: To remove the filter in arrow direction (as shown on figures). Use a vacuum
cleaner or water to clean, then put it in ventilated place until it's dry.

Back View

Rear panel Pre-Filter
Air inlet
Do not block the
air inlet
Remove water plug and
connect with flexile hose
with spigot
Active Carbon
Deodorizing Filter
HEPA Filter
Continuous
drainage tube
P19
Handle