Econo Cool Operation - Mitsubishi Electric MS-SGF09VC Operating Instructions Manual

E
CONO COOL OPERATION
Press during COOL mode

ECONO COOL operation.

The unit performs swing operation vertically in various cycle according
to the temperature of the unit. Set temperature is set 2°C higher auto-
matically.
Press again to cancel ECONO COOL operation.
or
• Pressing
What is "ECONO COOL"?
Swing air fl ow (change of air fl ow) makes you feel cooler than constant air fl ow.
So, even though the set temperature is automatically set 2°C higher, it is pos-
sible to perform cooling operation with keeping comfort. As a result, energy can
be saved.
P
OWERFUL COOL OPERATION
Press during COOL mode
POWERFUL COOL operation.
Fan speed : POWERFUL-high (exclusive speed for POWERFUL
mode)
Horizontal vane : Set position, or position (1) during AUTO setting
• Temperature cannot be set during POWERFUL COOL operation.
Press again to cancel POWERFUL COOL
operation.
• POWERFUL COOL operation is cancelled automatically in 15 min-
utes.
• POWERFUL COOL operation is cancelled when the following buttons
are pressed:
ON/OFF button, FAN button, ECONO COOL button
JG79A282H01_en.indd 6
page 4 to start
also cancels ECONO COOL operation.
page 4 to start
T
IMER OPERATION (ON/OFF TIMER)
1
Press during operation to set the timer.
Each press changes timer mode in the following order:
(OFF TIMER) (ON TIMER)
2
Press to set the time of timer.
Each press increases or decreases the set time by 1 hour.
Press until "TIMER RELEASE" is selected to
release timer.
Note:
• ON and OFF timers can not be used in combination.
• If power failure occurs while ON/OFF timer is set, see
function".
TIMER
RELEASE
page 4 "Auto restart
En-6
2009/11/27 14:22:02