Russell Hobbs RHEP7 Instruction And Warranty Book page 33

Steam leaks from the
4
float valve.
The float valve is unable
5
to rise.
Steam escapes from the
6 exhaust valve non-stop.
The power indicator
7
doesn't light/ turn on.
All indicators flash:
LED display shows E1
8
The sealing ring damaged.
The lid is not closed
correctly.
Food debris on the float
valve gasket.
The float valve gasket is
worn-out.
Too little food and water in
the inner pot.
Steam leaks from the lid or
exhaust valve.
The exhaust valve is not in
the sealing position.
Pressure control fails.
Power socket has bad
contact.
Bottom sensor fault.
33
Close the lid correctly.
Clean the float valve
gasket.
Replace the float valve
gasket.
Add water and food
according to the recipe.
Send to the service center
for repair.
Turn the exhaust valve to
the sealing position.
Send to the service center
for repair.
Please check the power
socket.
Send to the service center
for repair.