Vegetables Setting - Russell Hobbs RHEP7 Instruction And Warranty Book

Vegetables Setting

Normal Cooking:

In standby mode, press the "Menu" button.

The " " indicator light will turn on.

The LED display will flash "P01".

Now press the "+" button 2 (two) times until you reach the "Vegetables" menu setting.

The LED display will show "P03".

10 (ten) seconds later if no button is pressed, the appliance will automatically start
cooking using the "Vegetables" setting/ mode.

The LED display will show "P03" and start to countdown when pressure rises in the
cooker.
Preset Cooking:

In standby mode, press the "Menu" button.

The " " indicator light will turn on.

The LED display will flash "P01".

Now press the "+" button 2 (two) times until you reach the "Vegetables" menu setting.

The LED display will show "P03".

Press the "Delay Timer" button. The "Delay Timer" indicator will begin to flash. The LED
display will flash the amount of preset time.

Adjust the amount of preset time by pressing the "+''/"-" buttons. Each adjustment will
adjust the amount of preset time by 10 (ten) minutes.

10 (ten) seconds after setting the preset time, the appliance will automatically start preset
cooking using the "Vegetables" setting. The LED display will show the cooking cycle
finishing time and start to countdown.
To Exit the Cooking Cycle/ Mode:

Press the "Keep Warm" button to exit the current cooking cycle/ mode.
18