Cue Points - Rane MP4 Operation Manual

cue poIntS

You can set up to five visual cue points within
each track. Use the + button to place cue point.
Click the arrow to the left of each cue point to
jump to it. You can also jump to cue points using
keyboard shortcuts – 1 through 5 for the cue
points on the left deck, and 6 through 0 for the
right deck cue points. Notice that the stripe on
the Virtual Deck jumps to the 12 o'clock position
and changes color when you set a cue point –
you are at the cue point when the stripe is one
solid color and at the 12 o'clock position.
As the record plays on beyond the position of
the cue point, the colored bar will shorten by a
fifth for each rotation. Likewise, as you approach
the cue point, the color will grow by a fifth each
rotation. For example, the picture in the next
column shows the record just before the end of
the 5th rotation before the cue point.
16
Each cue point can have a different color. To
change the color of a cue point, click on the
colored square and choose a new color from the
drop down menu.
To remove a cue point, use the x button on the
right side of the cue point panel.
A cue point can occupy any of the 5 slots.
You can drag and drop cue points to change
their order in the list. If you wish to have the cue
points sorted chronologically, check the sort
cues chronologically option in the setup screen.
If you load the same track on to both decks, you
will be able to add or modify cue points from
either deck.
When you jump to a cue point in internal
mode while paused, the track will play from the
cue point for as long as the key or mouse button
is pressed, after which the playhead returns to
the cue point.
tIp: the rate of cue point stuttering is
controlled by your operating
keyboard repeat rate settings.
users: keyboard properties are in the control
panel. mac users: keyboard and mouse are in
System preferences.
tIp: use the keyboard shortcuts ctrl-comma
(for left) and ctrl-dot (for right) to place cue
points.
system
Windows
MP 4 - OPERATOR'S MANUAL 1.8.2