Adding Mode; Halting And Resuming Mode; Auto/Mnl (Manual) Starting Mode; Thickness Adjustment Dial - AccuBANKER AB-5000 MG/UV User Manual

$
Addition Mode
While working under the addition mode, the cumulative total is shown on the Counting Display. Press the
ADD button to select this function (the Addition Indicator must be lit). To clear this function, press the Add
button again.This will clear the Addition indicator.

Halting and Resuming Mode

To halt the machine during the counting operation, just press the Restart button. To resume the counting
operation,press the Restart button again.

Auto/MNL (manual) Starting Mode

When the MNL (manual) button is pressed, the machine is under the MNL starting mode. In this mode,
the machine will start counting, only, when the Restart key is pressed. When the MNL button is off, the
machine is set to the AUTO starting mode.The machine will start the counting operation automatically
when the hopper is filled with bank notes.

Thickness Adjustment Dial

TheThickness Adjustment Dial is factory defaulted.However it must be changed in the following cases:
* If the EC (chain) error occurs frequently,turn the Adjustment Screw toward“-“ (thin).
* If the feeding operation does not go smoothly due to new notes or thick paper sheets,turn the Adjustment
Screw toward“+”(thick).

Dust Proof Cover Function

Press the Dust Proof Cover Function button to select this function (the Dust Proof Cover indicator must
be lit). When this function is selected, the Dust Proof Cover will close automatically before the counting
operation begins.The cover automatically opens, in case the counting stops.To clear this function, press
the Cover button until the indicator turns off.