Hibernate Mode; Power Options Properties - Compal NTUC0 User Manual

•
Press the power button
•
Press the start menu power button
The settings can be accessed via Power Options: Advanced settings window. See
7.1.1 Managing Your Notebook's Power.
To exit Sleep Mode, please press the Power Button. You cannot exit Sleep Mode by
using any key or the Touch Pad. For more information on Sleep Mode, see 2.1
Turning Your Notebook On and Off.

7.1.2.2 Hibernate Mode

In Hibernate Mode, power is conserved by system data being copied to the hard
drive, and your notebook is completely shut down. While Hibernate Mode is exited,
your notebook will return to the same operating state it was in before entering
Hibernate Mode.
Hibernate Mode can be enabled/disabled in the Power Options window.
Your notebook will go into Hibernate Mode if the battery charge level becomes
critically low.
Depending on how you set the Power Management Options in the Power Options
window, use one of the following methods to enter Hibernate Mode:
•
Close the lid of your notebook
•
Press the power button
•
Press the Start menu power button
•
Start >
The settings can be accessed via Power Options: Advanced settings window. See
7.1.1 Managing Your Notebook's Power.
To exit Hibernate Mode, press the Power Button. You cannot exit Hibernate Mode
by using any key or the Touch Pad. For more information about Hibernate Mode, see
2.1 Turning Your Notebook On and Off.

7.1.3 Power Options Properties

To access the Windows Power Options window:
Start > Control Panel > System and Maintenance > Power Options
> Hibernate.
Chapter7 The Power System (Vista)
7-3