Cleaning, Maintenance And Repairs; Preparing The Blower For Operation - Stihl BGA 56 Instruction Manual

English
4.10.3 Storing the Charger
WARNING
￭ Children are not aware of and cannot assess the dangers
of a charger. Children may sustain serious or fatal injuries.
► Remove the battery.
► Store the charger out of the reach of children.
￭ The charger is not protected against all ambient
conditions. The charger may be damaged if it is exposed
to certain ambient conditions.
► Remove the battery.
► If the charger is hot: Allow charger to cool down.
► Store the charger in a clean and dry
condition.
► Store the charger in a confined space.
￭ The connecting cable must not be used for carrying or
hanging up the charger. The connecting cable and the
charger may be damaged.
► Hold the charger by the housing. A recessed handle is
provided on the back of the charger.
► Hang the charger on the wall bracket.

4.11 Cleaning, Maintenance and Repairs

WARNING
￭ The blower may start unintentionally if the battery is left in
place during cleaning, maintenance or repair operations.
This can result in serious injuries and damage to property.
► Remove the battery.
34

5 Preparing the Blower for Operation

￭ If the blower, battery and charger are not cleaned as
described in this instruction manual, components may no
longer function properly or safety devices may be
rendered inoperative. This can result in serious injuries.
► Clean the blower, charger and battery as described in
this instruction manual.
￭ Aggressive cleaning agents, high pressure cleaners or
pointed objects can damage the blower, battery and
charger.
► Clean the blower, charger and battery as described in
this instruction manual.
￭ If the blower, battery and charger are serviced or repaired
by the user, components may no longer function properly
or safety devices may be rendered inoperative. This can
result in serious or fatal injuries.
► Do not attempt to service or repair the blower, battery or
charger.
► If the blower, battery or the charger require servicing or
repairs: Contact your STIHL servicing dealer.
5 Preparing the Blower for Operation
5.1 Preparing the Blower for Operation
Perform the following steps before starting work:
► Fully charge the battery, @ 6.1.
► Clean the blower, @ 15.1.
► Mount the nozzle, @ 7.1.
► Check the controls, @ 10.1.
► If 3 LEDs flash red while you are checking the controls:
Remove the battery and contact your STIHL servicing
dealer.
There is a malfunction in the blower.
► Make sure the following components are in a safe
condition:
– Blower, @ 4.6.1.
– Battery, @ 4.6.2.
0458-712-9621-B