Samsung WF365BTB series Service Manual page 19

Part
Disassembling the
Pump motor Part
Removing the
Remaining water
figure
1. Separate the FRAME-FRONT and then remove
2. Separate the Clamp of the hose connected to
3. Separate the Clamp of the hose connected to
4. Separate the Clamp of the hose connected to
5. Separate the wire connected to the PUMP.
• If the washing machine works, drain the water
Description
the 2 screws fixing the PUMP.
the PUMP and then pull the DRAIN-HOSE.
the PUMP and then pull the HOSE-AIR.
the PUMP and then pull the HOSE-DRAIN.
in the wash tub by selecting the Spin course.
If the washing machine does not work, remove
the laundry from the wash tub and scoop the
remaining water out of the tub using a cup.
Removal and Reassembly _ 17