Error Message Appears and the Scanner Driver Screen Does Not
Appear
Connect the USB cable to a different USB port on the computer.
Check 1
If the USB cable is connected to a USB hub, remove it from the USB hub and
Check 2
connect it to a USB port on the computer.
Make sure that the scanner driver is installed.
Check 3
If not installed, install the scanner driver from the web page.
Your scanner may be locked.
Check 4
Close the running software program. Slide the scanner lock switch to the release position (
the USB cable.
Select your scanner on the application's menu.
Check 5
Note
• The operation may differ depending on the application.
Make sure that the application supports the ICA driver.
Check 6
You cannot start the scanner driver from applications not supporting the ICA driver.
Exit the scanner driver if it is running on another application.
Check 7
226
), then reconnect