How To Use - Panasonic CU-CZ12SKE Operating Instructions Manual

How to use

To switch between
powerful & quiet
( Remote control display
POWERFUL
QUIET
POWERFUL: To reach temperature quickly
• This operation continues until it is cancelled by
pressing again
QUIET: To enjoy quiet operation
• This operation reduces airfl ow noise.
To select operation mode
MODE
HEAT - To enjoy warm air
• Unit takes a while to warm up. The power
indicator will blinks at initial during this
operation.
• Unit may stops warm air supply for deice. The
deice indicator ON during this operation.
COOL - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
FAN - To circulate air in the room
AUTO - For your convenience
• During operation mode selection, the power
indicator will blinks at initial.
• Unit selects operation mode every 10 minutes
according to temperature setting and room
temperature.
To use maintenance heating
+8/15°C HEAT
• Maintain indoor temperature at 8/15°C. Fan
switches to high fan speed automatically.
• This operation overwrite the operation mode and
could be cancelled by pressing
• Defrost operation at outdoor unit
will result in sudden cold air from
indoor unit. Eliminate cold air with
heat mode.
Auto OFF/ON button
AUTO
OFF/ON
8
00_ACXF55-03360_YM0416-1-0.indb 8 00_ACXF55-03360_YM0416-1-0.indb 8
)
(NORMAL)
button.
.
MODE
15˚C
8˚C
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
1. Press the button once to use in AUTO mode.
2. Press and hold the button until you hear 1 beep, then release to use in forced
COOL mode.
3. Repeat step 2. Press and hold the button until you hear 2 beeps, then release to
use in forced HEAT mode.
• Press the button again to turn off .
Remote control display
FAN SPEED
MODE AIR SWING
TEMP TEMP
ON ON SET SET
TIMER TIMER
OFF OFF CANCEL CANCEL
AIR CONDITIONER AIR CONDITIONER
POWER /
DEICE
TIMER
HEAT
Indicator
(Green/
POWER/
DEICE
Blue)
(Orange)
TIMER
(Green)
+8/15°C HEAT
Press and hold for
approximately 5 seconds
to show 12-hour (am/
pm) or 24-hour time
indication.
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
6/28/2016 3:00:57 PM 6/28/2016 3:00:57 PM