Changing The Unit's Settings; Summary Of Settings - Panasonic DMR-E80H Operating Instructions Manual

Changing the unit's settings

Summary of settings

This chart shows the initial settings for this unit. See page 46 for details on menu operation.
≥Underlined items are the factory presets.
Tabs Menus
Channel Antenna System ( page 7)
Select to suit the type of antenna you are using. Channels are
set corresponding to the antenna system you select.
Auto Channel Setting ( page 7)
The unit sets the channels automatically.
Preset Channel Caption ( page 48)
You can give preset captions to the channels.
Manual Channel Caption ( page 48)
You can set channel captions manually.
VCR Plusr CH Setting ( page 24)
Set the guide channels for use with VCR Plusi timer recording.
Set Up Off Timer
Select how long the unit remains on when it is not being used.
Remote Control Code ( page 46)
To avoid operating equipment other than the one intended
(when more than one remote controlled item is in the same
area), change the remote control code.
Auto Clock Setting ( page 47)
The unit adjusts the clock automatically.
Manual Clock Setting ( page 47)
You can adjust the clock.
Time Zone Adjust ( page 47)
Adjust the time zone if it was not set correctly after auto clock
setting. This appears only after auto clock setting is complete.
Re-initialize Setting
This returns all values in the SETUP menus, except for the
clock, channel settings, ratings level, and display language, to
the default settings.
Disc Audio Some discs start in
Choose the audio language. a certain language
despite any
changes you make
Subtitle
here.
Choose the subtitle language.
Menus
Choose the language for disc menus.
Ratings
Set a ratings level to limit DVD-Video play. The password
screen is shown when you select levels 0 to 7.
To enter a password
1. Input a 4-digit password with the numbered buttons.
≥If you enter a wrong number, press [CANCEL] to erase it.
≥Do not forget your password.
2. Press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
3. Press [ENTER] to confirm the 4 digits.
If you insert a DVD-Video that exceeds the ratings limit you set, a message appears on the television.
Press [SETUP] to select "Ratings" again and change ratings.
DVD-Video mode
Select how to play pictures contained on some DVD-Audio.
The setting returns to "Off" when you change the disc or turn the unit off.
DVD-R compatible Rec
You can dub to DVD-R discs using high speed mode if this
setting is "On" when recording content to the HDD.
Video 3-D Y/C Separation
Turn 3-D Y/C separation on or off.
Hybrid VBR Resolution
Switch between automatic and fixed hybrid VBR resolution
when recording.
44
Continued on next page.
RQT6984
Options
≥TV ≥CATV
≥2 hr ≥6 hr ≥Off
•
≥Set Code 2 ≥Set Code 3
Set Code 1
≥j1 ≥0 ≥i1
≥Yes ≥No
≥English ≥French ≥Spanish
≥Original: The original language of each disc will be selected.
≥Other ¢¢¢¢: Input a code ( back cover).
≥Automatic: If the language selected for "Audio" is not available,
subtitles of that language will automatically appear if
available on that disc.
≥English ≥French ≥Spanish ≥Other ¢¢¢¢
≥English ≥French ≥Spanish ≥Other ¢¢¢¢
Setting ratings (When level 8 is selected)
8 No Limit: All DVD-Video can be played.
1 to 7: Prohibits play of DVD-Video with corresponding ratings
recorded on them.
0 Lock All: Prohibits play of all DVD-Video.
Changing ratings (When level 0–7 is selected)
≥Unlock Recorder ≥Change Password
≥Change Level ≥Temporary Unlock
≥On: You can play DVD-Video content on DVD-Audio.
≥Off: DVD-Audio are played as DVD-Audio.
≥On: High speed mode compatibility ("
" appears in the
dubbing list. page 28)
–Pictures are saved at 4:3.
–For SAP broadcasts use "Select MTS". ( next page)
Select the type of audio in advance.
–Hybrid VBR Resolution ( below) setting is "Fixed".
≥Off
You cannot dub programs to a DVD-R disc using the high speed
mode if you recorded the program on a DVD recorder that does
not have the "DVD-R compatible Rec" function, even when dub-
bing to the HDD with this setting "On".
≥On: Reduces noise for recording by separating the luminance (Y)
and color (C) signals received from the television station.
≥Off: Reduces the ghosting that occurs when recording fast mov-
ing images.
≥Automatic:Video compression is automated providing efficient
recording.
≥Fixed:
Video compression is fixed when recording providing
smooth video play.
Tabs Menus
Video
Still Mode
Select the type of picture shown when you pause play.
Seamless Play
Turn seamless play on or off on discs with play lists.
≥Seamless Play does not work with programs recorded in
LPCM or when using Quick View.
Black Level Control
Select normal, lighter or darker for adjusting the black level
control to the desired setting for picture enhancement.
PLAY k1.3 & Audio during Search
Audio
[HDD] [RAM] [DVD-R] [DVD-A] [DVD-V] [VCD]
Choose whether to have sound during the first level of fast-forward.
Quick View ( page 21) does not work if you make the setting "Off".
D. Range Compression [DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
Select MTS ( page 39)
Select whether to record the main or secondary audio type
(SAP) when recording to DVD-R or when recording using
LPCM sound ("Audio Mode for XP Recording" below).
Digital Audio Output
Change the settings when you have connected equipment through this unit's DIGITAL AUDIO OUT terminal ( page 51, [A]).
PCM Down Conversion
You can select whether or not to convert recorded audio
sampling rates from 96kHz or 88. 2 kHz (as is if setting
Off) to 48 kHz or 44.1 kHz (if the setting is On).
Dolby Digital
If the equipment you connected can-
not decode the signal, the setting
must be changed to PCM or Off. If not,
signals the equipment cannot process
DTS
will be output by this unit, causing
high levels of noise which can dam-
age your hearing and the speakers.
Audio Mode for XP Recording
Choose the audio type when recording with XP mode.
≥Sound recordings made using LPCM require more information
than usual. Consequently the picture quality of LPCM record-
ings may be less than that of normal XP mode recordings.
Display Status Messages
Choose whether to show on-screen messages automatically.
Language of Display Message
Choose the language for these menus and the on-screen messages.
Blue Background
Select "Off" if you do not want to have the unit show the blue
background when reception is weak.
FL Display
Changes the brightness of the unit's display.
TV TV Type ( page 9)
Screen Choose the setting to suit your television.
4:3 TV Settings for DVD-Video
Select how DVD-Video widescreen picture is shown on a 4:3
standard aspect television.
4:3 TV Settings for DVD-RAM
Select how DVD-RAM widescreen picture is shown on a 4:3
standard aspect television.
Options
≥Automatic
≥Field:
Less blurred field stills are shown. Select if jittering
occurs when "Automatic" is selected.
≥Frame: Sharper frame stills are shown. Select if small text or fine pat-
terns cannot be seen clearly when "Automatic" is selected.
≥On: The scenes in play lists are played seamlessly. This may
cause shifting of the points where scenes change. Some
play lists cannot be played seamlessly.
≥Off: The points where scenes in play lists change are played
accurately, but the picture may freeze for a moment.
≥Input Level (Lighter/Darker):
Adjusts the black level of the input signal (e.g., L1, L2, L3)
≥Composite & S Video Output Level (Lighter/Darker):
when connected to a TV through the VIDEO OUT or S-VIDEO
OUT terminal
≥Component Video Output Level (Lighter/Normal/Darker):
when connected to a TV through the COMPONENT VIDEO OUT
(Y/P /P ) terminal
B R
≥On ≥Off
– You may hear sound regardless of this setting with some discs.
[DVD-A]
≥On ≥Off
≥Main ≥SAP
– You cannot change secondary audio when recording audio to
DVD-R from an external source.
≥On: If the equipment or connection doesn't support 96 kHz or 88.2 kHz.
≥Off: If the equipment or connection does support 96 kHz or 88.2 kHz.
However, output will be down converted to 48 kHz or 44.1 kHz
regardless of settings if the signal is greater than 176.4 kHz or a copy
guard has been applied to the disc.
≥Bitstream: Select if the equipment you connected can decode the
signal.
≥PCM: Select if the equipment you connected cannot decode the
signal.
≥Bitstream: Select if the equipment you connected can decode the
signal.
≥Off: Select if the equipment you connected cannot decode the
signal.
≥Dolby Digital ( page 54) ≥LPCM ( page 54)
≥Automatic ≥Off
≥English ≥Español ≥Français
≥On ≥Off
≥Bright ≥Dim
≥Automatic: The display dims during video playback and goes off
completely when the unit is turned off. If you press a
button the display will brighten briefly. (At this time the
power consumed will be approx. 0.4 W.)
≥Aspect 4:3 & 480I ≥Aspect 4:3 & 480P
≥Aspect 16:9 & 480I ≥Aspect 16:9 & 480P
≥Pan & Scan ( page 54):
Video recorded for a widescreen is played as Pan & Scan
(unless prohibited by the producer of the disc).
≥Letterbox ( page 54):
Video recorded for a widescreen is played in the letterbox style.
≥4:3:
Programs played as recorded.
≥Pan & Scan: Video recorded for a widescreen is played as Pan & Scan.
≥Letterbox:
Video recorded for a widescreen is played in the
letterbox style.
45
RQT6984