Panasonic SC-ALL7CD Operating Instructions Manual page 16

Playback modes (
Select the playback mode.
1
Press [PLAY MENU] repeatedly to select
"Playmode" or "Repeat".
2
Press [2, 1] to select the setting and then press
[OK].
Playmode
Off Cancels the play mode setting.
Playmode
1-Track Only plays the selected track.
≥ " " indicator lights up.
(Skip to the desired track.)
1-Album Only plays the selected album.
≥ Press [3] or [4] to select the album.
≥ "
Random Plays the contents randomly.
≥ "RND" indicator lights up.
1-Album Plays the tracks in the selected
Random album randomly.
≥ Press [3] or [4] to select the album.
≥ "
Repeat
On Repeat Turns on repeat mode.
≥ "`" indicator lights up.
Off Repeat Turns off repeat mode.
≥ During random playback, you cannot skip to tracks which
have been played or press the numeric buttons.
≥ Playmode function does not work with "Programme play".
≥ The mode is cancelled when you open the disc tray, remove
the USB device, or start recording.
≥ [MEMORY]: When using the one-touch mix play function,
[PLAY MENU] does not work.
16
RQT0A83
, ,
[CD] [MEMORY] [USB]
" indicator lights up.
" and "RND" indicators light up.
) Programme play
(
[CD], [MEMORY], [USB]
This function allows you to programme up to 24 tracks.
[CD] (CD-DA)
1
Press [PGM, sDEL] in the stop mode.
≥ "Program" is shown for a few seconds.
2
Press the numeric buttons to select the desired
track.
≥ Do this step again to programme other tracks.
3
Press [1/;] to start playback.
[CD] (MP3), [USB], [MEMORY]
1
Press [PGM, sDEL] in the stop mode.
≥ "Program" is shown for a few seconds.
2
Press [3, 4] to select the desired album.
3
Press [9] and then press the numeric buttons to
select the desired track.
4
Press [OK].
≥ Do steps 2 through 4 again to programme other tracks.
5
Press [1/;] to start playback.
Check Press [:] or [9] in the stop
programme mode.
contents
Clear the last Press and hold [PGM, sDEL] in the
track stop mode.
Cancel Press [PGM, sDEL] in the stop mode.
programme
≥ "PGM Off" is shown for a few seconds.
mode
Clear all Press [∫] in the stop mode. "Clear All"
programmed is shown. Within 5 seconds, press [∫]
tracks again.
• The programme memory is cleared when you open the disc
tray, remove the USB device, or start recording.
)