Radio; Clock And Timers - Panasonic SC-PMX7 Operating Instructions Manual

Radio

30 FM stations can be preset.
Preparation
Press [SELECTOR] repeatedly to select "FM".
Automatic presetting
1
Press [RADIO MENU] to select "Auto Preset".
2
Press [2, 1] to select "Lowest" or "Current"
frequency.
3
Press [OK] to start presetting.
To cancel, press [∫].
Manual tuning and presetting
1
Press [6] or [5] to tune in to the station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
Selecting a preset station
Press the numeric buttons, [:] or [9] (main
unit: [:/6] or [5/9]) to select the preset
station.
Improving the sound quality
1
Press [RADIO MENU] repeatedly to select "FM
Mode".
2
Press [2, 1] to select "Mono" and then press
[OK].
To cancel, select "Stereo".
"Mono" is also cancelled when you change the
frequency.
To memorise the setting
Continue with steps 2 and 3 of "Manual tuning and
8
presetting".
8
RDS broadcasting
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY].
PS Programme service
PTY Programme type
FREQ Frequency
Note:
• RDS may not be available if reception is poor.

Clock and timers

Setting the clock
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select "CLOCK".
2
Within 10 seconds, press [3, 4] to set the time.
3
Press [OK].
Press [CLOCK/TIMER] to show the clock for a few
seconds.
Note:
• Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set
time.
Press [SLEEP] repeatedly to select the setting (in
minutes).
To cancel, select "Off".
> > >
30min 60min 90min 120min
^--------------------------------------------------------------b
To show the remaining time
Press [SLEEP].
Note:
• The sleep timer can be used together with the play timer.
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
Play timer
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1
Press [CLOCK/TIMER] repeatedly to select
"TIMER Adjust".
2
Within 8 seconds, press [3, 4] to set the start
time.
3
Press [OK].
4
Do steps 2 and 3 again to set the end time.
To start the timer
1
Prepare the audio source you want to listen to
and set the volume.
2
Press [F, PLAY].
"F" is shown.
To cancel, press [F, PLAY] again.
The system must be switched off for the timer to
operate.
To check the settings
Press [CLOCK/TIMER] repeatedly to select "TIMER
Adjust".
Note:
• The timer starts at a low volume and increases gradually to
the preset level.
• The timer comes on at the set time every day if the timer is
on.
• If you switch off the system and switch on again while a
timer is in operation, the timer will not stop at the end time.
>
Off