Inserting Media; Media Information - Panasonic SC-PMX7 Operating Instructions Manual

Hide thumbs Also See for SC-PMX7:
Table of Contents

Advertisement

Available languages

Available languages

Inserting media

Select "iPod_Dock" as the source
Open the cover and connect an iPod/iPhone with
Lightning connector.
iPod/iPhone
(not supplied)
Lightning connector
Select "CD" as the
source
iPad
OPEN/CLOSE
Select "iPod_Port" as the source
"USB" is displayed when a compatible
USB device is inserted.
• Do not connect the following models:
iPod classic, iPod [4th (colour display),
and 5th (video) generation], iPod nano
(1st generation)
Unexpected behaviour may occur.
iPad
"iPod_Dock" (Using Lightning connector):
• Make sure that the iPod/iPhone is fully inserted and its
back is resting against the cushion pad.
• Make sure to remove the iPod/iPhone from its case.
• Make sure to align your iPod/iPhone with the
connector when inserting.
"iPod_Port":
• Use the dedicated USB cable (not supplied) for iPod/
iPhone/iPad.
• Insert the USB device directly. Do not use any USB
extension cable.
• Before removing the USB device, select a source other
than "USB".
Disc tray:
• Remove the CD only after it stops rotating.
Charging an iPod/iPhone/iPad
Charging starts when an iPod/iPhone/iPad is connected
to this system.
• During standby mode, charging will not start from the
"iPod_Port" connection, however it will start as usual
from the "iPod_Dock" connection.
iPod_Port
- To charge from the "
" connection, start the
charging before turning this unit to standby mode.
• See the iPod/iPhone/iPad display for its battery
charging status.
• Disconnect the iPod/iPhone/iPad if it is not used for an
extended period of time after charging is complete.
• Charging stops when the battery is fully charged. The
battery will deplete naturally.

Media information

• Please be aware that Panasonic accepts no
responsibility for the loss of data and/or information.
Compatible iPod/iPhone/iPad (as of January 2013)
Compatible with "iPod_Dock" connection
(Using Lightning connector)
iPod touch (5th generation)
iPod nano (7th generation)
iPhone 5
Compatible with "iPod_Port" connection
[Using dedicated USB cable (not supplied)]
iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
iPod nano (2nd, 3rd, 4th, 5th, 6th, and 7th generation)
iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS /
iPhone 3G / iPhone
iPad (3rd, and 4th generation) / iPad 2 / iPad
iPad mini
Note:
• Compatibility depends on the software version. Update
your iPod/iPhone/iPad to the latest software before
using it with this unit.
• Read the User Guide of the iPod/iPhone/iPad for the
operating instructions.
Compatible USB devices
• USB devices that support bulk-only transfer.
• USB devices that support USB 2.0 full speed.
Note:
• Files are defined as tracks and folders are defined as
albums.
• Track must have the extension ".mp3" or ".MP3".
• This system can access up to:
- 255 albums (including root folder)
- 2500 tracks
- 999 tracks in one album
• CBI (Control/Bulk/Interrupt) is not supported.
• Some files can fail to work because of the sector size.
• NTFS file system is not supported (only FAT12/FAT16/
FAT32 file system is supported).
Compatible CD
• This system can play CD-R/RW with CD-DA or MP3
format content.
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
Note:
• Some CD-R/RW cannot be played because of the
condition of the recording.
• MP3 files are defined as tracks and folders are defined as
albums.
• This system can access up to:
- CD-DA: 99 tracks
- MP3: 999 tracks, 255 albums (including root folder) and
20 sessions
• Recordings will not necessarily be played in the order you
recorded them.
5
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents