Turn Signals; Headlamp Flasher - BMW 128i Owner's Manual

Hide thumbs Also See for 128i:
Table of Contents

Advertisement

Upshifts and downshifts are executed only
when they will result in a plausible combination
of engine and vehicle speed; thus, for example,
a downshift that would cause the engine to
overrev will not be executed by the system. The
gear selected is briefly displayed in the instru-
ment cluster, followed by the gear actually in
use.
Shifting gears via shift paddles* on the
steering wheel
The shift paddles allow you to shift gears
quickly since both hands can remain on the
steering wheel.
>
When you use the shift paddles on the
steering wheel to shift gears in automatic
mode, the transmission switches to manual
mode.
>
If you do not accelerate or shift gears using
the shift paddles for a certain amount of
time, the transmission switches back to
automatic mode.
If the selector lever is in the M/S gear
plane, manual mode remains
>
To shift up: pull one of the shift paddles.
>
To shift down: press one of the shift pad-
dles.
Upshifts and downshifts are executed only
when they will result in a plausible combination
of engine and vehicle speed; thus, for example,
a downshift that would cause the engine to
overrev will not be executed by the system. The
gear selected is briefly displayed in the instru-
ment cluster, followed by the gear actually in
use.
62
Online Edition for Part no. 01 41 0 014 954 - © 02/08 BMW AG
Overriding selector lever lock
Should the selector lever refuse to move out of
position P although the button on the selector
lever is pressed, the selector lever lock can be
overridden:
1.
Unclip the sleeve of the selector lever.
2.
Pull the sleeve up over the selector lever
until the sleeve is inside out.
3.
Using the screwdriver from the onboard
tool kit, refer to page 223, press the red
lever, see arrow, while moving the selector
lever to the desired position.
active.<

Turn signals/

headlamp flasher

1
High beams
2
Headlamp flasher
3
Turn signals
Using turn signals
Press the lever beyond the resistance point.
To turn off manually, press the lever to the
resistance point.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

135i

Table of Contents