BMW 1 SERIES 2013 Owner's Manual page 129

Hide thumbs Also See for 1 SERIES 2013:
Table of Contents

Advertisement

Entertainment
Compressed audio files
The CD player can also play back CDs with
compressed audio data: MP3 and WMA.
Selecting a track
1.
Press the button.
2.
Use the knob on the right to select the
desired directory.
>
: press the knob on the right to open a
directory.
>
: press the knob on the right to close
a directory.
3.
Select additional directories if desired.
4.
Highlight the desired track and press the
knob on the right.
You can browse through the directories during
playback.
To change to the current track:
Press the button.
Track display
If information about the current track has been
stored, it can be displayed.
1.
Press the button.
2.
Press the button.
Ejecting the CD out of the CD player
Press the
button.
The CD is partially ejected from the CD slot.
Operation indicators
CD player
>
"Insert CD"
The CD slot is empty.
>
"Error CD"
The CD can not be read or is defective.
>
"Temp. CD"
The operating temperature is too high.
128
Professional radio
Online Edition for Part no. 01402911200 - © 06/13 BMW AG
Notes
BMW CD players are officially designated
Class 1 laser products. Do not operate if
the cover is damaged; otherwise, severe eye
damage can result.
Do not use CDs with after-market labels; other-
wise, the labels can loosen as a result of the
heat generated during playback and possibly
cause irreparable damage to the system.
Only use round CDs with a standard diameter of
4.7 in/12 cm and do not play CDs with adapters,
e.g. single CDs; otherwise, the CDs or adapters
may jam and it may not be possible to eject
them.
Do not use a combined CD/DVD, e.g. DVD
otherwise, the CD/DVD can jam and will no
longer
eject.<
General malfunctions
BMW CD players have been optimized for per-
formance in vehicles. They may be more sensi-
tive to defective CDs than players for stationary
use.
If a CD can not be played, first check if the CD is
properly inserted.
Humidity
If there is high humidity, the CD or the focusing
lens for the laser beam may fog up, making it
temporarily impossible to play the CD.
Malfunctions with individual CDs
If there are malfunctions with individual CDs,
then they may be due to the following causes.
CDs that you burned yourself
Potential problems with home-burned CDs are,
for example, inconsistent data generation and
burning processes, as well as low quality or
excessive aging of the blanks that are used.
Only write on the upper surface of CDs with a
writing instrument that is suitable for the
purpose.
Plus
;

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents