Elem Garden Technic TRT2531-2 Original Instructions Manual page 91

10. SPECIFICATION
Engine
Displacement
Power
Idle speed min-1
Speed min-1
Power
2 Time ratio petrol: oil
Fuel tank
Ignition system
Candle
Electrode gap,
Lubrication system / fuel
Pump oil g / kWh
Capacity of lubricating oil tank chain,
Type of oil pump Automatic pump with automatic adjustment
Weight
Chain saw without bar or chain, empty tanks, kg
Saw with guide bar, chain and with full tanks, kg
Chain / chain guide
Standard length guide / cm
Guide lengths recommended inches / cm
Cutting length, inch / cm
Pitch, inch / mm
Thickness of the guide bar
Type of driving wheel / the number of teeth Spur 9.525 / 7
Chain speed at max power, m / s
Noise emission values measured according to relevant standard
Acoustic pressure level
Acoustic power level
Weighted root mean square acceleration according to relevant standard. : 7.0 m/s²
The declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another that the declared vibration
total value may also be used in a preliminary assessment of exposure.
A warning that the vibration emission during actual use of the power tool can differ
from the declared total value depending on the ways in which the tool is used and of the need
to identify safety measures to protect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
25.4 cm ³
0.9kW
3000
9500
1.9 kW
25: 1 (95/98oct: SAE 10W-30)
230 cm³
LD L7RTC TORCH L8RTC
0.6-0.7 mm
550
220 ml
LpA 90 dB(A)
LwA 109 dB(A)
The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
4.0
5.0
12/30
10/26
10/26
0.375
1.25/0.05 mm''
13
EN ISO 4871
K = 3 dB(A)
K = 3 dB(A)
ATTENTION !
:
K = 1.5 m/s²
91