Stihl FS 310 Instruction Manual page 19

Guard ring for mowing applications
3
2
1
For optimum protection from the ingress
of grass when using mowing
attachments:
Mount the guard ring (1) for mowing
N
applications.
Fit the thrust plate (2) and the guard
N
washer (3).
FS 310
Guard ring for sawing applications
2
1
For circular saw blades
Fit the guard ring (1) for sawing
N
applications.
Fit the thrust plate (2).
N
Cleaning the Gearbox and Cutting
Attachment Mounting Hardware
Clean the gearbox, the area surrounding
it, inside the grass shield and the cutting
attachment mounting hardware at
regular intervals. Also check for
contamination when changing the
cutting attachment and clean thoroughly
if necessary.
Remove all cutting attachment
N
mounting hardware from the
gearbox for this purpose.
Blocking the Drive Shaft
2
1
Insert the stop pin (1) in the bore (2)
N
in the gearbox as far as stop, apply
slight pressure.
Rotate the shaft until the stop pin
N
slips into position.
Mounting the Cutting Attachment
WARNING
Use a deflector that matches the cutting
attachment – see "Mounting the
Deflector".
English
17