Vibration Reduction - Nikon COOLPIX S810c User Manual

Problem
Wi-Fi (wireless LAN) function
turns off and will not turn on.
Camera makes sound.
Shooting
Problem
No image taken.
Cannot switch to shooting
mode.
Camera cannot focus.
Images are blurred.
Cause/Solution
In some rare cases, the Wi-Fi
(wireless LAN) function turns off
suddenly and will not turn on.
Reboot the camera then turn on
the Wi-Fi (wireless LAN) settings.
When Autofocus mode is set to
Full-time AF or while in some
shooting modes, the camera may
produce an audible focusing sound.
Cause/Solution
When the camera is in playback
mode, or setting items or setup
menu are displayed, press the
shutter-release button.
The battery is exhausted.
When the flash indicator flashes,
the flash is charging.
Disconnect the HDMI cable or
USB cable.
Turn off USB storage.
The subject is too close. Try
shooting using macro mode, easy
auto mode, or Close-up scene
mode.
The intended subject is not
suitable for autofocus.
Set AF assist in the setup menu
to Auto.
Turn the camera off and then on
again.
Use the flash.
Increase the ISO sensitivity
value.
Enable vibration reduction.
Use D (Best Shot Selector).
Use a tripod to stabilize the
camera when shooting (using the
self-timer at the same time is
more effective).
A
3, 87,
E67
75
A
26
18
47
94, E14
95
34, 39, 51
62
77, E56
18, 30
47
56, E29
77, E55
E30
49
F9