Panasonic WV-CW480S Operating Instructions Manual page 14

<Fixing the camera attachment to the
mounting bracket>
I Installations (WV-CW480S)
G Using Provided Mounting Bracket
• Secure the provided camera mounting bracket to wall or ceiling, and fix the provided cam-
era attachment to the mounting bracket with the screws for to the mounting bracket. (Refer
to the following figures.)
Verify the camera attachment and mounting bracket are mounted firmly after screwing
them.
• When routing cables sideway or through
the wall/ceiling, the mounting bracket is
used.
• When routing cables sideway, open the
sideway cable exit unscrewing the lid by
use of a hexagon wrench. Screw the
detached lid to the cable access hole on
the bottom of the bracket.
• Make sure that the sideway cable exits
do not face upward.
14
Mounting
bracket
Camera attachment (provided)
<Mounting hole pattern>
* For wall mounting, do not face the
sideway cable exits upward.
Drain slit*
92 mm
Cable access hole
51 mm
Bracket centre
Sideway cable exit
77 mm