Table of Contents
Advertisement
Action Control
The operations described below can be performed by shaking or tilting the camera.
Displaying the Previous or Next Image in Full-
frame Playback Mode
In full-frame playback mode, shake the camera up/
down to display the next image, or forward/
backward to display the previous image (when
Playback action control in the setup menu
(A14) is set to On).
• Make sure to hold the camera firmly with the
camera strap around your hand, and use your wrist
to shake the camera as shown in the illustration.
Using Action Menu
Press the V (action) button
to display the action menu.
• Shake the camera to
select an option listed
below, and press the V
button to perform the
operation.
Option
Shooting mode
selection
q Start movie
recording
K Quick playback
U Current position
f Exit
While the action menu is displayed, operations can be performed using only
the V button, shutter-release button, power switch, or Z button.
Adjusting the Map Display
• You can scroll the displayed map by tilting the camera while pressing the V
button.
• You can zoom in on the displayed map by shaking the camera once, and
zoom out by shaking it twice (when Map actions in the setup menu is set
to On).
Select a shooting mode (only restricted to some
shooting modes).
Press the V button to record/end a movie.
Display an image in full-frame playback mode.
Display the current position on a map (only when the
location data has been successfully calculated (A16)).
Exit the action menu.
Basic Shooting and Playback Operations
Scene auto selector
Confirm
Action menu
Description
13
Hide quick links:
Advertisement
Table of Contents
