Table of Contents
Advertisement
Activating/Deactivating Parental Control
1
When disc playback is stopped, select ACCESS
CONTROL in the features menu using 3/4, and then
press 2.
2
Enter your 4-digit code. If necessary, enter the code a
second time.
3
Move to Parental Control using 3/4.
4
Move to VALUE ADJUSTMENT (0-8) using 2.
5
Then use the 3/4 or the numerical keys on the remote
control to select a rating from 0 to 8 for the disc inserted.
Rating 0 (displayed as '– –'):
Parental Control is not activated. The Disc will be played in
full.
Ratings 1 to 8:
The disc contains scenes not suitable for children. If you set
a rating for the player, all scenes with the same rating or
lower will be played. Higher rated scenes will not be played
unless an alternative is available on the disc. The alternative
must have the same rating or a lower one. If no suitable
alternative is found, playback will stop and the 4-digit code
has to be entered.
6
Press ENTER/OK or 1 to confirm, then press 1 again to
exit the menu.
1en
Access control
Status window
Low Power standby
PBC
Country
1
When disc playback is stopped, select ACCESS
CONTROL in the features menu using 3/4, and then
press 2.
2
Enter the 4-digit code.
3
Move to CHANGE COUNTRY using 4.
4
Press the 2.
5
Select a country using 3/4.
6
Press ENTER/OK or 1 to confirm, then press 1 again to
exit the menu.
A
C
16
CCESS
ONTROL
1en
1
2
Child lock
Parental level
Change country
Change code
Changing the 4-digit code
1
When disc playback is stopped, select ACCESS
CONTROL in the features menu using 3/4, and then
press 2.
2
Enter the old code.
3
Move to CHANGE CODE using 4.
4
Press 2.
5
Enter the new 4-digit code.
6
Enter the code a second time and reconfirm by pressing
ENTER/OK.
7
Press 1 to exit the menu.
If you forget your 4 digit code
1
Press 9 to exit 'Child Protect' screen.
2
Select ACCESS CONTROL in the features menu using
3/4, and then press 2.
3
The 4-digit code can be cancelled by pressing 9 four times
in the 'Access Control' dialog.
4
You can then enter a new code (twice!) as described above
(Changing the 4 digit code).
Parental Control Disclaimer
This DVD player features the PARENTAL CONTROL
system which is intended to activate when playing DVD
discs furnished with certain software coding. This is
according to technical standards adopted by the set maker
and disc content industries.
Please note that the PARENTAL CONTROL system
will not operate a DVD disc which is not furnished with the
appropriate software coding. Also note that at the time of
release of this DVD player, certain aspects of the technical
standards had not been settled between set makers and
the disc industries.
On this basis Yamaha cannot guarantee the functioning of
PARENTAL CONTROL system and denies any liability
associated with unintended watching of disc content.
If in doubt, please make sure the disc plays according to
your PARENTAL CONTROL settings before you allow
children access to the player.
Advertisement
Table of Contents
