Panasonic WV-CF254 Operating Instructions Manual page 16

** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER ---
AGC ON
SYNC INT
WHITE BAL ATW
END SET UP DISABLE
• Editing the SPECIAL menu
To edit the SPECIAL menu (change settings), pro-
ceed as for editing the CAM SETUP menu above.
Move the cursor to END after the words SETUP
ENABLE appear. Then press
simultaneously for 2 seconds or longer.
The SPECIAL menu appears on the monitor. Select
the item to be changed and change the setting as
described for the CAM SETUP menu.
** SPECIAL **
CHROMA GAIN
AP GAIN
PEDESTAL
HUE
CAMERA RESET
RET END
Important Notice:
When the cursor is moved to END and the
CAM SETUP menu closed after changing the
parameters, the new values are stored in the
EEPROM (Electric Erasable and Program-
mable Read Only Memory). These values
remain valid until new values are stored, even
if the power of the camera is off.
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER ---
AGC ON
SYNC INT
WHITE BAL ATW
END SET UP ENABLE
(L) and (R)
....I....
....I....
.I.......
.I.......
- +
PUSH SW
-14-