Miele PT 8507 Operating And Installation Instructions page 7

Control keys
f Stop / End
Press to stop a selected program or end an already
stopped program.
[ Block plus
The respective program block (e.g. pre-drying) will
be added to the program.
FC Functions
Press this key to temporarily select another language
and/or access the Supervisor level.
m Delay start
Press this key to select a start time in the display.
K Information
To show program information
ü Skip
Cycles of a program in progress can be skipped or
repeated.
A Back to the previous display
e/- Next or previous line
S
Save
See the Programming Manual
$ Program locked
If a program has a "locked" status it cannot be stop-
ped or ended with the Off-button after one minute.
%
Program unlocked
\ Operating data
D Data transfer
Description of the appliance
Operator card
No programs are saved on this card. To transfer the
data from the control to the card and vice versa see
the Programming Manual.
30 programs with 6 blocks each can be saved on the
card.
The back of the card can be labeled.
Insert the card, arrow first.
7