Select A Program; Select - Miele PT 8507 Operating And Installation Instructions

Drying

3. Select a program

The dryer uses an electronic sensor system which
monitors the residual moisture in the laundry and a ti-
mer for extra safety.
Once the required level of dryness has been reached
the laundry is cooled and the drying program will
end.
1 Hot W. / Cot.- extra dry
2 Hot Wash / Cottons - dry
3 Hot Wash / Cottons - damp 20%
^ Select a program by turning the jog shuttle (e.g.
Program 2 Hot Wash / Cottons dry).
See the "Program Guide" for more information on
the standard programs.
10
0%
0%
FC A
4. Select [ "Blockplus" (if desired)
(Not available for standard programs)
^ Confirm the selected program by pressing the jog
shuttle.
22 Hot Wash / Cottons dry
15 % Drying
Cool down
[
^ Press the [ "Blockplus" button to select a pro-
gram block, e.g. pre-drying if desired.
22 Hot Wash / Cottons dry 22.0 / 22.0 lb
24 % Pre-drying
0 % Drying
[
The field [ is highlighted.
The function can be deselected by pressing the but-
ton again.
If you do not need to make any other changes to the
program:
^ Press the "START" button and the drying program
will begin.
22.0 / 22.0 lb
176 °F
e
m A
e
m A