Miele PT 8507 Operating And Installation Instructions page 28

Frequently asked questions
Power failure
y
Program stop.
Press Start.
^ Press "START" to continue the program.
Heating system fault
§
Program stop. Press Start.
Program runs with cold water.
^ Press "Start" to continue the program without hea-
ting. Contact Technical Service.
Heating system fault
§
Contact Technical Service.
if restart w/o success.
^ Contact Technical Service.
Pressure sensor fault
§
Contact Technical Service
if restart w/o success.
^ Contact Technical Service, if restart is not success-
ful.
Gas system fault
§
Contact Technical Service
if restart w/o success.
If the error occurs immediately after the program
start:
^ Open the gas valve and press "Start".
If the error occurs in the middle of a program run, the
gas pressure may have decreased due to use of ad-
ditional gas appliances.
^ Press the "Start" button.
^ Contact the Technical Service Department, if res-
tart is not successful.
28
Card fault
§
Reinsert card correctly in card
reader.
f
^ Insert the card properly into the card reader.
f
f
f
f
A