Samsung HG75AD690U Installation Manual page 44

Mixed Channel Map
¦
Mixed Channel Map is a function to mix Air, Cable channels.
− Mixed channel Map should be ON in order to mix Air, Cable channels.
− Use Channel Editor to sort the channels after turning on 'Mixed channel Map' in Hotel Option Menu.
(Only for Hong Kong and China model)
Sound Bar
¦
y Samsung Sound-Bar & Hospitality TV
− Samsung Sound-Bar & hospitality TV support HDMI 1.4 to listen to TV sound on the Sound-Bar by using a single
HDMI cable.
− Supporting model.
✎ Sound-Bar : HW-E350/E450/E550
y Operation of "Hotel mode" in Sound Bar
− The following items for the TV's hotel option menus should be set in advance.
✎ Hotel option → Power On → Power ON Volume = "User Defined" / Power On Volume Num / Max Volume
✎ Hotel option → System → Sound Bar Out = "On"
− Connect an HDMI cable from the HDMI OUT port of Sound-BAR to the HDMI IN3(ARC) port of hospitality TV.
− After being connected to the 2014 hospitality TV via HDMI Cable, when the TV turns on, the Sound-Bar automatically
detects the TV and then converts to "hotel mode" by itself.
− The change with power-on volume & max volume on TV is applied to the connected sound-bar since TV boots twice.
y Features of "Hotel MODE" in Sound-BAR
− Synchronized power on/off with TV.
− HDMI_CEC enabled.
− Accessible "HDMI OUT" port only. (Other inputs are disabled)
− Synchronizing "power-on"&"max" volume with the TV the Sound-Bar's volume is set at half of the TV
− Adjustable "power-on"&"max" volume acquired from the TV's hotel option menu. Sound-Bar volume=TV volume/2
Example. If the volume settings in TV are "power-on volume=20 and max volume=90", the Sound bar will operates at
volume=10, max volume=45.
44
English
*This function may differ depending on the model.