Advertisement
Basic operation (to be continued)
15. SLEEP
Press SLEEP button on the remote control, and press it again to select a time: 15
Min, 30Min, 45Min, 60Min, 90Min, 120Min. If you select OFF, the timer is closed.
The TV will turn to standby mode automatically when the preset time is up. Press
MENU button can exit the timer setting.
Note: The sleep timer you have set will be cancelled when the TV turns off or if a
power failure occurs.
16. NICAM
The button is used to set NICAM sound system.
17. MUTE
Press this button to shut off the sound , and press it again to restore TV sound.
18. VOL
and VOL
Press these buttons to adjust TV volume.
19. PROG
and PROG
Press these buttons to change channel upward or downward.
20. Arrow buttons (
)
To move cursor left/right/down/up.
21. OK
Validation key.
22. MENU
Press this button to display main menu or exit the menu.
23.EXIT
To exit current menu.
Note: POWER, VOL / , PROG
/ , MENU and INPUT on the remote control have
the same function as the ones on the side panel of the TV.
12
Advertisement
