Hand Held Products 71 Instruction Manual page 7

Removing the 71Memory Module
To remove aTIMlM from the HP-7I:
1) Turn off the HP-71.
2) Remove the door to the card-reader port.
3) Using your thumbs, press downward on the gold-
embossed side (top)of the 7lMlM while guiding
the Module out with your fingers. Use even
pressure and be sure the M/M is pushed as
straight out as possible.
4) Replace the plastic insert.
5) Replace the port cover.
Using the 71 M/M . . . RAM
Hand Held Products' 71 Memory Modules'offer you
the flexibility of using your extended memory in two
ways:
. Main Memory
When a 71 RAM M/M is installed, you have instantly
added 32K,64K, or 96Kbytes of RAM to your HP-
71. This additional memory becomes a part of Main
RAM in your HP-71. A simple MEM test willshow
the additional RAM in the HP-71. Type MEM
fÑDTiÑElto
show the increased memory on the
HP-77 display.