Low Battery Alert; Matching (Network) - TaoTronics TT-BS007 User Manual

(1) Reduced to the effective scanning distance.
(2) Scanning by interference, do not do other operations, the system will
automatically hopping, until you can properly send data.

7. Low battery alert

During the scan, the buzzer continuously issued "Didi tick" three times the voice
prompt, indicating low voltage wireless scanning gun needs to be charged.
8. Charge
Switch off scanner, insert the round charger port into the charging port at the
bottom of the scanner, connect the power charger to start charging. Start charging, the
power indicator lights long; charging when the scanner is off and with low power,
power light flashs. Batteries can be filled in about two and a half hours, the power
indicator light flashes; charging, power indicator lights long.
9.

Matching (Network)

When leaving factory, scanner and receiver have been paired, under normal
circumstances, users no longer need to match. If users need to re-pair, follow these
steps:
(1) Switch on the scanner;
(2) Pull out the receiver's USB cable from the computer and make sure that USB
cable and the receiver is connected, and that the receiver's antenna connected
properly;
(3) Use "1 on 1 match " bar (see common features for bar code setting) in the printed
scanner scan manual;
(4) After scanning, connect the receiver's USB cable to the computer within 5
seconds;
(5) If the scanner buzzer "Didi tick" three times, said the pairing is successful, if
given a "dee dee dee dee dee dee" , said pairing failed;
(6) If the pairing is successful, the scanning gun and the receiver starts to work in
7