Installation Steps - TaoTronics TT-BS007 User Manual

Wireless scanning gun and its receiver have loop cutting inspection for each packet
to ensure the accuracy of data transmission so that data error and loss does not occur.
3. Accessory Details
Parts Name
Wireless laser scanner
Receiver
Charger
USB Cable
External Antenna of Receiver
Instruction
Warranty Card

4. Installation Steps

When leaving factory, scanner and receiver have been paired, unless the user for
advanced network settings, under normal circumstances, users no longer need to match.
Initial installation, follow these steps:
(1) Connect the receiver to an external antenna, tighten the screws;
(2) Connect one end of the USB cable to the receiver's USB port, and then the other
end connected to the computer's USB cable port, the indicator light at the
receiving end is blinking after the success of connection;
(3) Create a new text input box on the computer, the cursor at the open text entry
box;
(4) Press the Scan button, buzzer "Di-di-di " three times prompt, scanner into
working condition, this time working status indicator light;
(5) When the bar code scanning is successful, "tick" is heard, while blue light
flashing, indicating scan successful, the indicator light will flash if the receiver
receives data. Bar code displayed on the computer input box.
5. Scanning
Specifications
5V/500mA
A-A 80cm
433MHz
5
Quantity
1
1
1set
1
1
1
1