Panasonic AW-E600 Operating Instructions Manual page 27

GEN-LOCK ADJUSTMENT
Phase adjustments must be performed with the camera
or the RCU (RCB) when external synchronizing signals
are supplied to the system in cases where multiple
cameras are used or peripheral devices are connected.
HORIZONTAL PHASE CONTROL
Observe the waveform of the external synchronizing
input signal (black burst signal) and video output signal
on a two-channel oscilloscope. Then match the hori-
zontal phase of both signals by adjusting them with the
cameras or RCU's horizontal phase control.
Adjust the horizontal phase
[ADJUSTMENT by CAMERA]
1. Press the NO/BAR switch for over 5 seconds to dis-
play the color bar.
2. Select [G/L. Color Bar Set] on the main menu, then
select [H PHASE] on the submenu.
3. Adjust the horizontal phase with the YES/ABC and
NO/BAR switch.
External gen-lock input signal
(black burst output of special
effect generator)
Video signal
@
**G/L. Color Bar Set**
H Phase
SC Coarse
SC Fine
Color Bar Set 7.5IRE
Return
[ADJUSTMENT with RCU (RCB, Hybrid control panel )]
Use the horizontal phase control.
ENC OFF
VF ON
USER SET
H.PHASE
Horizontal phase
control
-25-
OPTION CARD
VIDEO OUT
I/F REMOTE
MENU
0
1
G/L IN
ITEM/AWC
0
YES/ABC
IRIS
NO/BAR
DC12V IN
NO/BAR switch
YES/ABC switch
PAGE ITEM UP DOWN
SC PHASE
COARSE FINE
0 270
90 180
Subcarrier phase
fine control
Subcarrier phase
coarse control