Panasonic AW-E600 Operating Instructions Manual page 19

CONNECTION OF DEVICES WITH CAMERA PAN/TILT CONTROL SYSTEM
• To connect the pan/tilt unit to the camera, use the
pan/tilt unit cable AW-CA50T15.
• Power is supplied from the pan/tilt unit.
1. Before connecting them, press the power
switch on the pan/tilt unit AC adaptor and the
ON/OFF switch on the hybrid control panel in
the OFF position, respectively.
2. Fix the camera securely to the pan/tilt unit using
the mounting adaptor.
3. Connect the 50-pin end of the pan/tilt unit cable
to the I/F Remote connector on the camera.
Connect the 15-pin end of the cable to the
pan/tilt unit.
4. Connect the pan/tilt unit to the hybrid control
panel with the 10BASE-T cable and coaxial
cable. For details, refer to the manual for the
hybrid control panel.
5. First switch on the pan/tilt unit AC adaptor, then
press the ON/OFF switch on the hybrid control
panel in the ON position. The camera and pan/
tilt unit can now be controlled from the hybrid
control panel.
LENS
IRIS Cable
LENS
ZOOM/FOCUS Cable
Pan/tilt unit
AW-PH300
OFF O I
POWER
Pan/tilt unit AC
Adaptor AW-PS300
10BASE-T
Cable
PAN/TILT CONTROL
Coaxial
Cable
CAMERA CONTROL
Coaxial
Cable VIDEO
-17-
OPTION CARD
VIDEO OUT
I/F REMOTE
MENU
G/L IN
ITEM/AWC
YES/ABC
IRIS
NO/BAR
DC12V IN
Camera Mounting
Hole Adaptor
(Supplied)
Pan/tilt unit Cable
AW-CA50T15
FUSE(POWER) FUSE(LAMP)
POWER
FUSE FUSE
ON
FUSE FUSE
AC Adaptor
-PS300
AW
Video
Monitor
Composite Video
S VIDEO
Hybrid control
panel
G / L I N BREVIEW MONITOR OUT
S-VIDEO OUT D C 1 2 V I N
AW-RP501
T D M U L T I P O R T H U B A U X C O N T R O L
T A L L Y
P A N / T I L T C A M E R A
CONTROL OUT CONTROL OUT 6/1 OUT PREVIEW IN
Control Panel
AC Adaptor
AW-PS301