Panasonic AW-E600 Operating Instructions Manual page 10

7. NO/BAR Switch (NO/BAR/ )
The item just below can be selected by pressing
this switch while the Sub Menu is on the screen.
While the Sub Menu is displayed any setting can be
brought down to a lower value with this switch.
When the menu is not displayed or the camera is in
shooting mode, the color bar and the shooting con-
ditions are alternately indicated by pressing the
switch.
8. Video Output Connector (VIDEO OUT)
A composite video signal is provided at this con-
nector.
9. Iris Connector (IRIS)
Input terminal for lens with an iris control function.
Pin No. Signal Pin No.
1 Return Control
2 Not Used
3 GND
4 Auto/Manual Control
5 Iris Control
6 Lens Power
Signal
7 Iris Follow
8 Auto/Remote Control
9 Not Used
10 Not Used
11 Not Used
12 Not Used
-8-
Iris Connector (IRIS)
o q
i !0
u
!1
!2
y
t
<Front View>
10. I/F Remote Connector (I/F REMOTE)
Input terminal dedicated to control signals from the
optional Remote Control Box (RCB) (WV-CB700A)
and the RCU (WV-RC700A, WV-RC550) and the
camera pan/tilt unit (AW-PH300).
* WV-CB700A is connected through the optional RCB
cable (AW-CA50T10).
* WV-RC700A/WV-RC550 is connected through the
optional RCU cable (AW-CA50A26).
* AW-PH300 is connected through the optional pan/
tilt unit cable (AW-CA50T15).
11. Power Indicator
Red LED lamp lights to indicate that the specified
DC power is supplied to the camera.
w
e
r