Rinse Aid; Consumption (Ecofeedback) - Miele HG05 Operating Instructions Manual

Settings menu

Rinse aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage is set in stages
from 0 to 6.
It is set to 3 at the factory.
If the function to adjust the Automatic
programme has been activated, the
amount of rinse aid dispensed in the
Automatic programme can be higher
than that set.
If spots appear on crockery and glass-
ware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
 Use the  arrow buttons to set the
level you want and confirm with
96

Consumption (EcoFeedback)

You can programme the dishwasher so
that the energy and water consumption
of the currently selected programme
appears in the display. The estimated
consumption can be displayed before
the programme starts and the actual
consumption can be displayed after the
programme has finished.
In this menu you can also call up the
total energy and water used in all previ-
ous dishwasher programmes (see
"Caring for the environment,
EcoFeedback consumption indicator").
Consumption indicator
 Select the
 Select the setting you want and con-
firm with
Total consumption
OK .
You can display the values for
and Water
 Select the
You can also reset the values for the
total consumption to 0.
 Select the
 Select the
 Confirm the message with
The values are now reset to 0.
Display consumption
.
OK
.
Total consumption
Reset option.
Yes option.
option.
Energy
option.
OK .