Table of Contents
Advertisement
Figure 5. Length Menu
Note:
No Length can be set if the main type is selected to Trade Action.
8.
Set the Overlay Position of the main type: This menu, shown as Figure 6, is used for setting the overlay
position of the card No., with the X/Y coordinate configurable. If not required, select None to disable this
feature.
Figure 6. Overlay Position Menu
9.
Trigger Channel settings: Select the channel for message overlay and record triggering, and time delay for
recording if required. After completion of settings, click OK to return to the ATM Settings menu shown as
Figure 7 below.
100
Advertisement
Table of Contents
