Download Print this page

Before You Use - Yamaha CHS-506 Owner's Manual

Advertisement

Thank you for selecting the YAMAHA chimes.
Please read this owner's manual carefully, and truly enjoy this instrument for
years to come.
1 Never use a metal type hammer or mallets to
strike the sound column with. The sound column
will break.
2 Always use the instrument on a flat, level sur-
face. The instrument will not function properly on
a sloped surface.
3 When assembling the stand, make sure each
part is firmly attached, and there is no twisting or
disfigurement in the frame. Also, make sure that
all wing nuts are firmly tightened.
4 Use your toes to operate the damper pedal. Do
not stand on or put your weight on the pedal. Do-
ing so may cause the pedal to break.
5 Do not touch the damper adjuster. The adjuster
has been adjusted at the factory. Moving the ad-
juster may result in the damper not functioning
properly.
Damper Adjuster
1 When transporting or moving the instrument, do
not subject it to strong shocks.
2 The sound column's pitch and/or tone may
change if the columns are scratched or bent. Be
careful.
3 When the instrument is to be transported over
long distances, especially by vehicle, do so with
the sound columns removed from the stand. The
shape of the stand may change and the column's
wire/strings may be cut if the columns are not re-
moved.

Before you use

6 When playing the chime, make sure the caster
7 Hit the Head Plug when playing the chime. Never
8 Do not keep the chime in a place where high tem-
9 For regular cleaning, wipe with a soft, dry cloth.
Be careful when transporting
4 When attaching or removing the sound columns,
5 After the sound columns are removed, wrap
brakes are firmly set and the chime stand does
not move about.
hit the sound column (pipe) with the hammer.
Head Plug
peratures and high humidity are present. Doing so
will result in the shortening of the instruments life.
Never wipe with thinner, or polishing prepara-
tions.
do so in a place where there is sufficient room so
that the columns do not come into contact with
other objects.
them in a soft cloth, etc., to prevent scratching,
and then transport.
Sound Column
7

Advertisement

loading

This manual is also suitable for:

Chs-520Ch-500