Epson LX-300+II Reference Manual page 86

Panel light
state
f Paper Out
n Pause
f Pause
f All the lights on
the control panel
n = on, f = flashing
••• = short series of beeps (three beeps)
••••• = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the
corresponding function is not available.
86
Maintenance and Troubleshooting
Beep Problem
pattern
Solution
•••
Continuous paper is not fed back to the
standby position.
Tear off the printed document at the
perforation; then press the Load/Eject
button. The printer feeds the paper to the
standby position. Press the Pause button
to turn off the Pause light, if necessary.
•••
A single sheet of paper is not fully ejected.
Press the Load/Eject button to eject the
sheet. Then press the Pause button to turn
off the Pause light, if necessary.
•••
Paper is jammed in the printer.
Clear the paper jam as described on
page 101.
– The print head is overheated.
Wait a few minutes; the printer resumes
printing automatically once the print
head has cooled.
•••••
An unknown printer error has occurred.
Turn off the printer and leave it off for
several minutes; then turn on the printer
again. If the error recurs, contact your
dealer.