Print Job; Cancel - Konica Minolta IP-601 Instruction Manual

Chapter 4 Control Panel Setup

Print Job

Cancel

You can stop the job reserved or the job in progress. If the job is still on your com-
puter, first, delete the job from your computer and press the [STOP / CLEAR] key on
the control panel. You can not stop the remaining job completely by only pressing the
[STOP / CLEAR] key. The [STOP / CLEAR] key can clear the memory of the print
controller and E-RDH in the main body printer but can not clear the remaining job on
your computer.
How to cancel the job
1. While a job is currently printing, touch the [Stop] key to cancel the job.
The confirmation screen will appear.
2. Touch the [EXIT] to confirm the cancelation.
Touch the [CONTINUE] to continue printing without canceling the job.
NON COMPLETE JOB LIST
You may want to view a list of the print jobs that remain not output because of
cancellation or deletion from the queue.
To do this, touch [NON COMPLETE JOB LIST] in the Job Status Screen.
The list is displayed with job names, user names, file names, status, etc.
4-16 Print Controller INSTRUCTION MANUAL