Table of Contents
Advertisement
Chapter 4 Control Panel Setup
LCD Touch Screen
The touch screen is an LCD (liquid crystal display) that displays interactive screens
with touch sensitive keys for making copy/print job selections. Selections are high-
lighted at the touch.
The screens also work with the conventional control panel keys.
The touch screen of the control panel is covered with glass. Do not drop
heavy items on the glass, or put excess weight or pressure on it; other-
wise the glass may break or become scratched.
After the power switch is turned on, the Konica name displays for approximately 10
seconds, until initial machine settings are established. Then, the 7 levels of Warm-Up
Screen displays for approximately 6 minutes, until the fixing temperature is reached.
When the [Basic Screen] (copy mode basic screen) is displayed, the touch screen
becomes interactive. The interactive condition enables you to communicate directly
with the printing system/copier system/scanner system simply by touching keys
displayed on the screen; or by pressing conventional keys, as required.
When you touch the [STATUS] key on the Basic Screen, the Job Status Screen will
be displayed.
These screens automatically display information regarding copying/printing status,
print job status and settings.
4-4 Print Controller INSTRUCTION MANUAL
[Basic Screen] (copy mode basic screen)
[Job Status Screen]
Advertisement
Table of Contents
