Note: Refer to your user’s guide for information about cleaning your device. For localized language versions of this document, go to www.youjieaidc.com. Getting Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected.
Page 3
Power Supply Assembly (if included) Connecting the Scanner USB:...
Keyboard Wedge: Reading Techniques The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Hold the scanner over the bar code, press the button, and center the aiming beam on the bar code.
Standard Product Defaults The following bar code resets all standard product default settings. Standard Product Defaults Keyboard Country Scan the Program Keyboard Country bar code below, then scan the numeric bar code(s) from page 11, then the Save bar code to program the keyboard for your country.
Page 6
Trigger The following bar codes will allow you to use the scanner in Manual Trigger - Normal Mode (need to press the button to read) or Presentation mode (the scanner is activated when it “sees” a bar code). Manual Trigger - Normal (Default) Presentation Mode Suffix...
Add Code ID Prefix to all Symbologies Scan the following bar code if you wish to add a Code ID prefix to all symbologies at once. Add Code ID Prefix To All Symbologies (Temporary) Note: For a complete list of Code IDs, see the User’s Guide for your product at our website, www.youjieaidc.com.
Programming the Interface Scan one of the following bar codes to program your interface. Keyboard Wedge IBM PC AT and Compatibles with CR suffix USB IBM SurePos (USB Handheld Scanner) Interface USB IBM SurePos (USB Tabletop Scanner) Interface USB Keyboard (PC) USB Keyboard (Mac) USB Japanese Keyboard (PC) USB HID Bar Code Scanner...
Mobile Phone Read Mode When this mode is selected, your scanner is optimized to read bar codes from mobile phone or other LED displays. However, the speed of scanning printed bar codes may be slightly lower when this mode is enabled. Hand Held Scanning - Mobile Phone Presentation Scanning - Mobile...
Data Format Editor Instructions The following are abbreviated instructions for entering a data format. For complete instructions refer to your User’s Guide, available at our website, www.youjieaidc.com. 1. Scan the Enter Data Format symbol. 2. Primary/Alternate Format: scan 0 for Primary Format 3.
Youjie reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Youjie to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Youjie.
Page 14
(E) repair or service of the product by anyone other than Youjie or its authorized repre- sentatives. This warranty shall extend from the time of shipment for the duration published by Youjie for the product at the time of purchase ("War- ranty Period").
Page 15
This includes but is not limited to: cables, power supplies, cradles, and docking stations. Youjie extends these warranties only to the first end-users of the products. These warranties are non-transfer- able. The duration of the limited warranty for the Youjie 4600 scanner is ninety (90) days.
Need help?
Do you have a question about the yj4600 and is the answer not in the manual?
Questions and answers