Panasonic TQBJ0323-1 Operating Instructions Manual page 41

Menu operation (continued)
IN STANDBY MODE
You can turn ON or OFF the audio output in standby
mode.
Change
Change setting
setting
OFF Deactive
ON
Active
NOTE:
• When STANDBY MODE is set to ECO, the audio output
cannot be activated in the standby mode, even if ON is
selected.
AUDIO IN SELECT
You can select the AUDIO IN 1 or AUDIO IN 2 terminal
to connect the audio output of the devices connected to
COMPUTER 1 IN or COMPUTER 2 IN.
Change
Change setting
setting
AUDIO IN SELECT
Select AUDIO IN 1 or
COMPUTER1 IN
AUDIO IN 2 terminal
Select AUDIO IN 1 or
COMPUTER2 IN
AUDIO IN 2 terminal
▌
You can use the 7 different test patterns to adjust the
focus of the image.
Change
Change setting
setting
Change pattern
Press [MENU] or [RETURN] to return to the
PROJECTOR SETUP menu, or press repeatedly to
escape the menu mode.
NOTE:
• The initial screen is an all white pattern. Only when
PATTERN is assigned to the [FUNCTION] button, the lattice
pattern will be displayed as the initial screen.
▌
Change
You can reset all of the customized settings in MENU to
Change setting
setting
the factory default.
• If the
menu, "INITIALIZE ALL" will be displayed. Select
OK and press [ENTER], "NOW INITIALIZING... " is
displayed followed by "POWER OFF" display.
Select OK and turn the power off according to the
instruction. (All other buttons are deactivated.)
• The
screen will be displayed when the power is
connected. (  page 12)
NOTE:
• The usage time of the projector, lamp runtime and the
NETWORK settings will not be initialized.
• When
ensure to enter the correct password when initializing.
• After
is reset to the factory default setting and PASSWORD
setting is turned OFF.
TEST PATTERN
To display the test pattern.
ENTER

Change
setting
INITIALIZE ALL
[ENTER] is pressed in the INITIALIZE ALL
LANGUAGE and INITIAL SETTING menu
PASSWORD in SECURITY menu is activated,
INITIALIZE ALL operation is completed, the password
Change
Change pattern
setting
TEST
ENGLISH  41