Panasonic TQBJ0323-1 Operating Instructions Manual page 21

Turn the projector ON or OFF (continued)
POWER INDICATOR
POWER indicator status
Indicator status
No illumination or flashing
Red
Green
Orange
NOTE:
• When the power is turned off, the internal fan cools the lamp using internal power supply.
• The power is turned on again while cooling the lamp and recovers to the projection mode. Recovery may take a while.
• While the power is turned off (when
consumed.
STANDBY
(R)
ON(G)
LAMP
TEMP
POWER indicator
No power is supplied and the internal cooling fan is not operating.
Lit The power is turned off (when STANDBY MODE is set to ECO).
If [POWER] button is pressed, projection starts.
Flashing The power is turned off (when STANDBY MODE is set to
NORMAL).
If [POWER] button is pressed, projection starts.
Flashing The power is on and preparing for projection.
Lit The projector is projecting.
Lit No power supply and the power is preparing for being turned off.
It is turned off (The projection is set in STANDBY MODE) after a
while.
Flashing The power is switched on again while cooling the lamp and
recovering to the projection mode. Recovery may take a while.
STANDBY MODE is set to ECO, the POWER indicator is lit red), power of about 0.4 W is
POWER indicator
 shows status of the projector's power
When the TEMP indicator flashes, the
POWER indicator lights red and you
INPUT
cannot turn the projector on.
SELECT
ENTER
MENU FUNCTION
Status
ENGLISH  21