Details of your projector (continued)
PROJECTOR'S REMOTE CONTROL
Top and rear view
Remote control
signal emitters
Front view
①
MENU
②
③
ENTER
FREEZE
④
COMPUTER
⑤
DEFAULT FUNCTION
⑥
DIGITAL ZOOM
⑦
NOTE:
•
Do not drop the remote control.
•
Avoid contact with liquids or moisture.
•
Do not attempt to modify or disassemble the remote control.
•
Do not let strong light shine onto the signal receptor which will cause a malfunction.
•
The remote control operates within the range of 7 m (23' 0"), approximately ±30 ° vertically and horizontally from the projector
avoiding any obstacles.
•
The operating range may differ due to the screen material and may not be effective with a translucent screen.
Installing/removing batteries
Press the tab and lift up the
cover.
Use only manganese batteries.
AUTO
SETUP
⑫
RETURN
AV
MUTE
⑪
VIDEO
INDEX-
WIN.
⑩
⑨
VOLUME
⑧
Insert the batteries according to the
polarity diagram indicated inside or
remove.
① POWER
Switch between standby mode and projection
mode. ( page 22, 23)
② Display the Main menu. ( page 29)
③ Navigate through the menus with [ ] and
confirm the selection with [ENTER]. ( page 28)
④ Capture the projected image as a frozen picture.
( page 25)
⑤ Switch the required input signal button to select.
( page 25)
⑥ Reset some of the settings to the factory default
settings. ( page 26)
⑦ Control the zoom size. ( page 27)
⑧ Control speaker volume. ( page 26)
⑨ Create shortcut assigned to certain selected
function. ( page 27, 40)
⑩ Display frozen image while the display of
subsequent images continues. ( page 26)
⑪ Turn off the projection temporarily. ( page 25)
⑫ Detect the input signal.
Adjust the settings of SHIFT, DOT CLOCK
and CLOCK PHASE in the POSITION menu
automatically for COMPUTER signals. ( page 25)
ENGLISH 15