UPO PESUKARHU 6012 User Manual page 58

Start the operation
58
SPINNING
Aggressive spinning for non-delicate laundry at high spin RMP.
You may engage the reduced spin RPM knob.
Spinning speed (rounds per minute) can be decreased by
pressing the lower spinning speed key.
- Adding washing and softening agents
(see Tips for washing and energy saving)
• pre-wash compartment
• main wash compartment
• softener compartment
If you do not apply the program which includes the pre-wash
feature, you may add washing detergent directly into the drum,
using the measuring vessel.
When adding softener, be careful to fi ll the dispenser
only up to the marked level.
Be sure to close the detergent dispenser when
opening/closing the appliance door.
• Push the START button (E). The machine starts operating after
a few seconds. LED indicating the current washing stage lights
up. If the door is not closed after the machine is switched on,
the START LED starts fl ashing again after a few seconds.
When you close the door, the machine initiates the selected
program.
• As each washing stage is completed the relevant washing stage
indicator LED goes off and the subsequent one goes on.
• In case you would like to alter the washing program after the
initiated washing operation, turn the program selector for one
second to the position "0", followed by the selection of a new
program. Switching the machine off deletes any previously
selected additional functions(i.e. Pump stop), so they have to be
reactivated.
Upon switching OFF, all additional pre-selected
functions are deleted; therefore they must be switched-
ON again.